DIY Care of Stone & Tiles: Stain Removal Tips


DIY Care of Stone & Tiles: Stain Removal Tips

By : Amelia Taylor
Tiles and natural stone are great for durable kitchen countertops, backsplash, and floors. These are long-lasting surfaces that are super easy to maintain. Unfortunately, spills, splatters, mould and mildew quickly settle on tile and stone surfaces and requires a lot of elbow grease, especially hard water stains and mould on bathroom tiles and shower walls. It is good to regularly maintain your stone surfaces and tiles using DIY stain removal techniques. Use non-abrasive tools and mild cleaning agents to restore the shine of your countertops, flooring and backsplash. You can also hire fully-trained bond cleaners in Townsville for detailed cleaning of a rental property if you are at the end of your tenancy. They can help you remove stubborn stains from stones and tiles. Here is a complete DIY guide to care your stone and tile surfaces and eliminating stains like a pro: Cleaning natural stone surfaces and tiles requires proper tools and techniques. Different types of stone have their own guidelines for cleaning and care that need to consider. Using strong chemicals and abrasive tools can cause damage to your bathroom tiles, slate and other natural stone surfaces.

1. Dish Soap & Hydrogen Peroxide for Tea & Coffee Stains

Do you want to remove coffee spills or stubborn tea or juice stains from your tiles and natural stone surfaces? Instead of using store-bought cleaners, mix a few tablespoons of mild dish soap detergent, hot water and hydrogen peroxide in a spray bottle. Apply the solution and leave it for 10 minutes. Make sure you test the solvent on a hidden area of your tile to see how it reacts. Use an old toothbrush or a non-abrasive tool to scrub the surface. Rinse it with water and buff dry it using a plain cloth.

2. Remove Blood Stains with Hydrogen Peroxide

Do not ruin your delicate tiles or floors by scrubbing hard blood stains abrasively. Instead, dab the stain with a microfiber cloth dipped in hydrogen peroxide. You can also use diluted bleach but it has a very pH level and can be corrosive. So, open the doors and windows for proper ventilation when cleaning your bathroom tiles and floors. The mild stains and grime becomes stubborn if you don’t clean your house regularly. So, always keep a close eye on tiles and other surfaces and treat blood and other stains immediately.

3. Gum and Wax Using Ice Technique

Removing stuck gum or wax from stone and tiles can be tricky. You can place ice cubes in a plastic bag and lay it over the affected area. After 10 minutes, remove gum or wax using a craft stick or butter knife. Do not use any sharp tool as it could damage the finish of your tile.

4. Grease and Grime with Magic Eraser

You can remove built-up grease and grime from your natural stone surfaces and tiles using a magic eraser. It is a mild scrubbing tool that can help eliminate all types of stains from porcelain, ceramic and slate surfaces without causing any damage. You can also use baking soda to remove stains. It is one of the best ingredients that can help you remove grime and make your entire house smell good. You can also hire professionals for a thorough bond cleaning Townsville for the entire property and get the full bond back.

5. Remove Hard Water Stains

Mineral deposits and hard water stains can easily build up on bathroom tiles and area around your showers. This can leave your surface cloudy and dirty. To protect the finish of your tiles, use safe and sound products. Using scouring powders and sharp tools can leave scratches or scuff marks behind. Instead use white vinegar to remove mineral deposits from the glazed glass or ceramic tile. Do not use vinegar or any other acidic solution on natural stone surfaces. You can use baking soda to get rid of hard water stains from marble and other natural stone surfaces. Make a paste and apply it on the surface. Scrub with a brush and rinse the stone thoroughly. Make sure you apply waterproofing for kitchen and bathroom tiles and keep your protected from damages.

6. Get Rid of Rust Stains

If you want to remove dark rust stains from a stone or tile, use a combination of lemon juice and borax powder. Make it a thick paste and apply it on the affected surface. Leave it for a few minutes and rub it gently with a brush. Let it dry completely until you rinse it with water. Repeat the process if required.

7. Oil Stains

Use baking soda and water paste to remove oil stains and splatters from granite countertops. Spread the paste all over the stain and let it rest for an hour. Wipe and rinse dry it for a sparkling result. You can find other eco-friendly way to clean your house. It is good to hire the best bond cleaners Townsville if you are at the end of your tenancy and get your full bond money back.


This is a complete guide to help you remove all types of stains and grime from stone and tiles. Do not use abrasive cleaning products and tools if you want to maintain its finish and shiny look.