The window screen is one of the dirtiest spots in your home. It is because the screen continuously gets exposed to rain, wind, bugs, etc., and as a result, accumulates a lot of dirt and dust. People usually overlook the cleaning of screens because removing dirt from this surface requires more effort and time in comparison to other household areas.
However, you should not forget that a dirty window screen obstructs the outside view and worsen the air quality that passes through it. This poor indoor quality air may lead to different allergies and
breathing problems. So, you must clean it properly. Following the correct DIY method and steps to clean the window screen make the task a lot easier.
If you want to clean the surface at the end of the lease period, take professional help. Contact the best cleaners who offer
end of lease cleaning Townsville to get the job done perfectly. If you want to carry out the task to make your window area look sparkling clean, you need to follow some guidelines.
Here is a step-by-step guide to DIY window screen cleaning.
How to Clean Window Screen without Removing
If you don’t have enough space to remove the window screens from the frames, then you do not have any other choice than to clean it as it is. You can use the vacuum cleaner to get the job done as it is capable of effortlessly eliminating loose dust and dirt.
Choose a soft bristle attachment to avoid damaging the screen. Another efficient way for cleaning non-detachable window screens is pressure washing. You just need to ensure that the washer is set on low intensity. Too much water force can damage the screen surface. You might also try cleaning the surface with a hose.
It can effortlessly remove the dirt without damaging the screen. Remember that a dirty window screen is one of the main
reasons why your home might not feel clean. So make sure you clean it as perfectly as possible.
How to Clean Window Screens Thoroughly
If there is a possibility, it is always advisable to remove the screen from the window area and then clean it properly. It helps you to get rid of the stubborn dirt quickly. Professionals who offer thorough end-of-lease cleaning in Townsville, QLD, also prefer to clean the screen by removing it. The step-by-step approach will help you to get the job done without any hassles.
Step 1: Remove Window Screens
By removing the screen, you will be able to get rid of all of the dust and dirt much more effectively. However, you must be very careful when removing the screen. Otherwise, it can easily get damaged.
Step 2: Prepare a Cleaning Solution
The Townsville market has an extensive range of cleaning products. However, most of the products contain dangerous substances. Such toxic substances irritate the eyes, throat, skin as well as pollute the indoor air. So, you should prepare your own solution at home. In 2.5 gallons of water, dissolve one and a half cups of all-purpose dish soap. If you don’t have any dish soap, you can substitute white vinegar.
Step 3: Remove the Dirt
Once the solution is ready, take your screen into the bathroom or out of the house. After that, spray the solution on the screen and scrub it clean to get rid of any remaining dirt. Although any brush with soft bristles would work, you should use a brush particularly made for scrubbing window screens. Scrub both sides of the screen lightly to ensure it is clean.
Step 4: Wash the Window Screens
Once you are done with the scrubbing, it is time to fully clean the screen. Keep the window screen horizontally and clean it with warm water to remove all the dirt and suds. If you think there’s still room for getting better result after washing, apply the solution and repeat the process.
Step 5: Dry the Screen
Before reinstalling the screen in the frame, lay it flat on a clean, flat surface to dry completely. It can take a lot of time and a lot of elbow grease to complete the task.
If you have a busy schedule or are moving out of a rental property, consider hiring a professional end of lease cleaning company in Townsville, Queensland. Tenants often forget to clean the screens, which leads to conflict with landlords. It is one of the
common end of lease cleaning mistakes to avoid.
Step 6: Check and Reattach the screen
Check the screen properly for holes and gaps before reattaching it. These gaps can allow small insects to enter your home, which can be a massive concern. To fill in the gaps and holes, simply use translucent nail paint. If the holes are more noticeable, obtain and apply sealant from a local store. Reattach the window screens to their right placements at the end.
Conclusion
Cleaning the window screen doesn’t have to be a challenging task if you follow the step-by-step method mentioned above. The best thing is that it doesn’t require a lot of fancy preparation or supplies.
If you are moving out of the rental property, hire reliable end of lease cleaners in Townsville, as they will clean the surface perfectly. That will help you to
get back the bond money.
